Email:admin@hxjinqiao.com / kylin@hxjinqiao.com
Tel:+86-516-66671368 / Fax:+86-516-82631786
Idioma : español1.Introduction of concrete core catcher drilling machine:
concrete core catcher drilling machine is a new tool used for drilling holes on reinforced concrete,rocks,ceramics,glass and fire-proof materials.It features in high-efficiency,smooth hole-wall and accurate drillings.This machine is widely used in building construction,airport runway construction,water,electricity,heat and gas installation engineering as well as railways and bridges construction.
2.Technical Parameter:
Hydraulic Highway Guardrail Cement Road Water Core Drilling Machine
3.Picture Show:
a
4.On-site working:
5.Certificate of concrete core catcher drilling machine
6.Package details:
Total 2 parts.One nude package for the main body,one plywood case for accessories.
2550*1500*1950(main body), 1800*550*600mm(plywood case).
Item | Value | Unit |
Dimension(L*W*H) |
2250*1500*2210(Working) |
mm |
Dimension(L*W*H) |
2250*1500*2210(Folded) |
mm |
Tires distance | 1300 |
mm |
Left and right guide rail walking distance | 200 |
mm |
Slide distance forwards and backwards | 150 |
mm |
Mast walking diatance |
1200 |
mm |
Drilling depth | 800 |
mm |
Drilling diameter | 50-200 |
mm |
Walking motor rated torque | 888 | Nm |
Walking motor rated flow |
75 | LPM |
Walking motor rated speed |
191 | r/min |
Walking motor rated pressure |
17 | Bar |
Walking motor allows maximum back pressure |
14 | Mpa |
Drilling motor nominal capacity | 20 | ml/r |
Drilling motor rated pressure |
20 | Mpa |
Drilling motor rated speed |
2000 | r/min |
Twin twist |
|
|
Walking speed | 5400 | m/h |
Slide guide angle | +/-10 |
° |
Frame angle adjustment forwards and backwards | +/-20 |
° |
Hydraulic system pressure | 31.5 | Mpa |
Hydraulic system flow |
20 |
ml/r |
Gear pump flow | 20--5 | ml/r |
Gradeability | 30 |
° |
Hydraulic oil tank | 30 | L |
Water tank | 220 | L |
Cooler | 10 | dm2 |
Weight | 1000 | kg |
1. Daily check and care of machine
a. After or before operation every day, all joint points of screws must be checked, see whether they are getting loosed, especially the screws on joints points of main machine and operation device. If there are loosed screws, immediately tighten them.
b. Observe interface of hydraulic elements with eyes to check if there are any leakages at the pipe joints of all oil circuits.
c. Before each work shift, machine should run several minutes (a litter longer in winter) with low speed, and operate handles with hand for warming up.
d. Infuse lubrication to each lubricating point once before operation of each shift.
Hxw water borehole core drilling machine rig is a new tool used for drilling holes on reinforced concrete,rocks,ceramics,glass and fire-proof materials.It features in high-efficiency,smooth hole-wall a…